The PPA 571 coating protect metal fencing from corrosion for 15 years

Archive for February, 2016

Protecting Sports Car Calipers with Powder Coating

Posted on: February 13th, 2016 by byersbushblog

If you have a sports car that you want to keep in pristine condition consider getting the calipers powder coated. Calipers suffer a great deal of contamination and are subjected to the elements regularly during standard use. This leads to rusting and early wear that can be prevented with a solid powder coating application.

They’ll Look Better than New

One of the biggest reasons that so many people decide to powder coat the calipers of their vehicle is that they can adjust the way that these calipers look through the process. There are plenty of different colors to choose from and it’s easy to get just the right finish that you want when dealing with a top company like Byers Bush.

That means you’ll be able to completely customize the look of your caliper. You could change them to match a new set of wheels put on your vehicle, or to stand out against the paint job nicely. When the color is customizable plenty of cool results are possible.

Extended Life

Calipers aren’t cheap, especially on a sports car where they are larger and made from more expensive materials. If you have an expensive vehicle it’s often worth the expense to protect these very important devices.

You’ll get many more years of performance out of your calipers when you spend the money to protect them, and you’ll have a more reliable coating than what you get from painting the parts. This means that you won’t spend as much keeping your vehicle going over the long term.

Disassembling the Calipers

Whether or not brake calipers should be disassembled before the coating process is controversial in the automotive industry. Most facilities require that the calipers are completely disassembled to avoid any possible damage to seals and other sensitive parts.

Others argue that calipers see higher levels of heat through day-to-day operation than what is involved in the firing process to heat up the powder coating in the first place.

While it’s certainly a debatable process, if you don’t consider yourself to be an expert on the matter it is always better to fully disassemble your calipers before having them coated to avoid potential problems later on down the road. You’ll feel better about doing it and won’t have to worry about dealing with a failure later.

Working with a Reputable Company

Calipers are a vital part of your vehicle and if they don’t function properly you aren’t going to stop. That’s why you need to make sure you’re working with a reliable company before you start the job. If you take them into a budget business that does a poor job finishing the calipers because they simply don’t have the experience, you’re out the money that you spent and might be in danger.

You might realize the mistake was made when trying to put the calipers on your vehicle if they no longer fit. You might not realize any problem was made until your braking doesn’t work like it should and you end up in a dangerous situation.

It’s a good idea to work with seasoned professionals when having this type of job done, you want to make sure the company has plenty of experience in the industry overall.

Those calipers might not be a big deal to replace on budget vehicles where they are more affordable, but when you drive a more expensive car it often makes a lot of sense to protect the calipers before they begin to wear out.

If you decide to do it try and find a company that has experience working on these important braking components. If you can’t find a company with experience in that area, at least make sure they have experience with plenty of applications in the past. That will help you guarantee that you are going to get the results that you are looking for.

Contact Byers Bush for a metal corrosion preventing coating in protecting your car’s calipers, to make it last longer and maximize their work as important parts of your car.

Professional Powder Coating Service Done by Large Company

Posted on: February 11th, 2016 by byersbushblog

When you have a major project that needs to be completed it often doesn’t make sense to go with the small location shop to have it completed. Sure they do good work on a small scale, but when you need a massive job finished you could be wasting your time with their services.

You are often much better off going with a larger shop that’s equipped for the work volume you’re sending their way.

Faster Turnaround Times

Some people aren’t too concerned about the turnaround times on powder coating projects, but this isn’t common. Usually you’re having something important protected and you want it back as soon as possible. When that’s the case the amount of time it’s going to take for the project to be completed will be a very real factor involved when deciding on the company to work with.

If you’re worried about a project getting finished on time, make sure that you ask specifically how long the task is going to take to be completed. Make sure that you get a finish date in writing so that you know when you can expect your finished products back. That’s really the only way to decide on a good supplier for your needs.

Lower Costs

At the larger facilities it’s often more affordable to have large projects completed. That’s because the staff is already in place and there is more than enough equipment to complete the project. For this reason it’s generally more affordable to have such a large project completed at a large facility.

You’ll usually get lower prices that are a bit more reasonable because the company is comfortable with the work. That’s a good reason to at least consider going with a large company rather than a small one when hiring out a large project.

Equipment already Available

There’s only so much that can be coated an hour with smaller equipment. Even large heating ovens will only hold a few parts at a time, and that’s why it takes so long to complete large coating jobs at a smaller facility, they simply don’t have the equipment to do most of the project at once.

When you go to a large company like Byers Bush, your project will be processed by much more equipment, or larger equipment. The more capable tools simply get the job done in less time and at a higher quality overall. That’s one of the main reasons that you should bring larger projects to a larger facility to have the work done if you are concerned about turnaround times.

Better Quality

The last thing you want is for a company to have their employees working around the clock to try and meet an order that they are used to handling. That’s exactly what will happen if you hire a small company to take on a particularly large project.

They won’t know what to do to get the tasks done and you’ll end up with tired employees working longer than they are used to and creating lower quality results for you in the end. This simply isn’t worth the supposed savings that you are going to get by working with the company in the first place.
There are plenty of good reasons to consider hiring a large company to take on your powder coating project for you, but it’s important to know the ones that are most important to you. Always talk with the company in detail about your project before deciding to go with them.

Only you can decide if they are going to do a good job with your project or not and that comes from getting a good understanding of the company. That takes time. After you decide that you trust a company, give them a small project to work on first and then hire them for the big project after.

This gives you a chance to make sure they are going to do the high quality work they say they will. After you’re sure about the company’s work you can go ahead with the main project with confidence. It doesn’t always make sense to hire a large company, but when you are dealing with a large project it’s the best thing that you can do in most instances.

Contact Byers Bush to get the best powder coating service for your equipment done by the professional powder coat company and have your equipment properly protected against corrosion.

Preparation is the Most Important Step in Powder Coating

Posted on: February 9th, 2016 by byersbushblog

There are many people out there that believe they can powder coat tools and equipment with ease. Sure there is equipment available for purchase that will do the job for you, and the investment isn’t as much as you might think for products to do the bare minimum job, but achieving quality results isn’t something that you can easily and without significant preparation.

In fact, the preparation is more important than the coating process itself. If you don’t know how to prepare the surface properly you’ll end up with a low quality finish that isn’t going to look nice or hold up over time. That’s obviously not something that you want, so take your time and really nail that preparation.

Strip it Down

Many times when coating something you have to remove paint or a previous coating before you can even start the process. This involves lots of scraping, grinding, heating and sanding to remove the outer coatings.

It can take some serious time and effort to strip parts down all the way, but when you’re finally done you’ll have a shiny metal that’s ready for washing and further prep until you finally start coating the piece for future protection.

Clean it up

The most important part of preparation is getting your parts completely clean. They can’t have debris, oil or anything else on them before you get started with the coating. Anything present on the surface is going to mess up the end results, and that’s the last thing that you want to happen.

You should wash all the parts vigorously in oil removing solution with a small amount of soap or another degreasing solution. If there are any rough edges that you don’t want to in the finished product you’ll likely have to remove them with sanding or through sandblasting.

Since the cleaning process is so important it’s vital that you get professional help if you don’t think you can do the job properly. A company will have industrial tools and equipment to get all those parts completely clean.


Outgassing is the process of removing grease, gas and other contaminants that may have seeped into the metal that you’re about to coat. This usually means heating up the metal in the oven before coating it.

If you don’t outgas the metal properly you could end up with bubbles and other contaminants that ruin the finished coating around your product. It’s not that difficult of a procedure, but it’s something that you have to remember to account for.

Masking the Parts

Pieces about to be counted have to carefully be masked with clean tools, gloves and anything else that you need to do the job properly. Some things like bolt threads have to be masked so they aren’t altered by a coating.

It’s difficult to get this process right and if you do it improperly you’ll end up with coating where you don’t want it or poor results that you don’t want to live with.

There is a great deal of preparation involved in any powder coating project. If you don’t take the time to follow all the different steps involved, you’ll end up with poor results that aren’t worth the effort.

Experts have more experience getting all the preparation right, but that doesn’t mean you can’t do the job on your own. You just have to use the right tools and equipment and proceed very carefully through all the coating steps along the way.

Unfortunately all the time and effort that you put into getting the project right might not make it worth it compared to just paying a pro to take care of it for you.

Contact Byers Bush to let them prepare and give your equipment the professional powder coating service and save yourself from the entire headache of preparing and doing powder coating yourself which can lead to uncertain results.

Extend the Life of Hardware Property Door with Powder Coating

Posted on: February 7th, 2016 by byersbushblog

Anyone with experience maintaining rental properties know how much of a hassle exterior door can be. These seemingly simple devices need regular maintenance to stay in good shape and over time the hardware in them begins to wear out so that you have to replace them all.

Paying for the hardware itself isn’t a big deal, but paying for the labor to change out all that hardware can be. Instead of dealing with regular replacements every few years because of rust and wear, you’re better off spending a bit more initially to have all the hardware powder coated before putting the doors on to begin with.

The Cost is Negligible

Paying to have hardware protectively coated is more affordable than you might think. You can have this done for a small investment and then you’ll dramatically cut down on all the hardware replacements and sticky door problems that you run into later on.

Sure it requires more of an investment up front, but all the time and effort that you save from this investment makes it more than worth it.

It Looks Nice

While you may not notice too much of a difference now when the door hardware is fresh and in pristine condition, it will be readily apparent in a year or two after corrosion has set in. That’s because the unprotected hardware is going to get all dinghy and start looking worn, while the hardware that’s powder coated is going to hold up nicely and will likely look brand new with a minute of washing every year or two.

Not only will the hardware look nice longer, but you’ll have control over the color of the hardware as well. That means you could have red hardware to match that red door, or yellow hardware to accent a black door nicely. Whatever look you want to go for, you’ll be able to accomplish it with a protective coating.

Years of Added Operation

When you pay to powder coat door hardware you’re extending the operating life of that simple equipment by years. You prevent corrosion and really make your equipment much more reliable. It’s simple to have this procedure done at most locations and the best part of all is that you can have your existing hardware protected if you already have all the door hardware for your facility.

Most companies like to buy extra hardware ahead of time to prepare for eventual failures. Send that hardware into your local powder coat expert such as Byers Bush and they can protect the hardware so that when you do start using it, you have many more years of use before it must be replaced, compared to standard timelines.

Fewer Calls

The last things you want to deal with are calls about doors that aren’t opening and closing like they used to. It’s tiring to have to drive out to a property and change out door hardware or worry about greasing it up.

This won’t be as much of an issue on properties that change tenants regularly, but any of your long-term properties are going to require that sort of attention eventually because you won’t have all that maintenance time that you have with open properties.

Do yourself and your business a big favor and either invest in powder coated hardware right away, or pay to have it protectively coated the next time that you have to work on one of the doors. It’s nice to have the added strength and stability, plus it’s just a nice touch that will make the property seem well-maintained, and give it just a bit more class.

Few people are likely to rent a place just because it has well-maintained doors, but it’s often a combination of these little details that eventually leads to more people renting.

Contact Byers Bush to get your door property a high performance powder coating to maximize your investment in your hardware property from corrosion attack.

Always Select the Best Coating Company to Handle Your Project

Posted on: February 5th, 2016 by byersbushblog

Powder coating is an excellent way to protect metal equipment from rust and other issues over time. Unfortunately applying such a coating is a very sensitive and precise process. It is something that you want completed by certified professionals, especially when you are having highly valuable items protected.

If you’re working with a new company for the first time for such a project it’s important that you make sure the company does a small project for you before you hire for a large one.

Assess the Quality

The main reason that you want to hire the company for a small project is so that you can assess the quality of the final product that they offer. If the company gives you back a poorly coated piece of equipment then you know to look for someone else instead.

If they give you back a flawless piece that you are proud to have you know that you can likely move ahead with larger projects in the future without worrying about how they are going to turn out. The only way for you to find out what type of results you are going to get is to hire the company to do the work for you.

That’s why it makes so much sense to hire the company for a smaller project first so that you don’t end up with poor results on very expensive equipment or a time-sensitive project.

Get a Feel for the Timeline Involved

If you aren’t experienced when it comes to hiring someone to powder coat equipment for you, you like much time the whole process is going to take. The company will probably tell you how long you can expect to wait before you get your item back, but the only way to know for sure how long they are going to take is to hire them.

After you pay the company to do at least one project for you, you will have a more realistic idea of how long things are going to take from beginning to end.

Learn to Communicate

There isn’t much that can be lost in translation when paying someone to powder coat your parts or equipment, but it’s still important to get some practice communicating with the company before working on something important.

Make sure that they understand what you want done before any work starts in the first place. If you feel like there are doubts around he orders you’ve given you should ask questions and verify that the company knows what you are talking about.

It’s up to you to make sure that things are done properly and that you and the company are on the same page If you have a hard time communicating and the final results are less than what you hoped for, you can go to another company that is a bit better at communication and understanding what you are really looking for.

It doesn’t matter if you are working with a highly rated company, or a team that you have never heard of before. You want to hire them out for a smaller and less important project first if you can. Even when working with a team like Byers Bush.

It is vital that you get some experience with them so you know how the whole process works and how long you will be waiting until the project is finished. After that first run through you’ll feel a lot better about how things are going to go and you’ll be confident that you are going to get what you want in the end.

Contact Byers Bush for a professional powder coating service with years of experience delivering a quality powder coating result with service guarantee.